-
Home Series
-
Medium Series
-
MPS Series
-
ESS series
-
IHS series
-
Monitoring System
DPTH-WM75LEKSolvert Inverter System
Medium Series|non-TR / LV
Spec.
-
Purpose
solar inverter(outdoor type)
-
Rated Output
75.0kW
-
PV voltage Range (MPPT)
450-800V
-
Rated voltage
600V
-
Current Distortion(THD)
Total within 5% / each difference within 3%
-
Maxium power point tracking Efficiency
98%
-
Display
Graphic LCD
-
Outline dimensions
650 x 1030 x 320 (mm)
-
Weight
111.5 kg
-
Purpose
solar inverter(outdoor type)
-
Rated Output
75.0kW
-
PV voltage Range (MPPT)
450-800V
-
Rated voltage
600V
-
Current Distortion(THD)
Total within 5% / each difference within 3%
-
Maxium power point tracking Efficiency
98%
-
Display
Graphic LCD
-
Outline dimensions
650 x 1030 x 320 (mm)
-
Weight
111.5 kg
Technologies
INVERTER FOR PHOTOELECTRIC POWER GENERATION SYSTEM
- Optimal design of installation and operation
DIK PV Inverter has enhanced the thickness and painting of the case to avoid durability and appearance problems. It also displays information such as the operating status and power generation of the inverter on the LCD display, and automatically starts and
It is designed to automatically stop and to self-diagnose even when a failure is detected and to attempt an automatic restart of the large climate for 5 minutes.
- Maximum Output Point Control
Since the power characteristics of solar cells vary according to the amount of insolation and temperature, it is necessary to change the operating point of the inverter according to the output state of solar cells to obtain maximum power.
The DIK PV inverter determines the output of these solar cells and controls the operating point so that the inverter always has maximum efficiency.
- High power factor and high efficiency inverter
- The DIK PV inverter always controls the power factor to be greater than 0.98 (30% load condition) depending on the system, reducing harmonic damage to other electrical appliances connected to the system and always providing clean power.
In addition, conversion efficiency is also operated at a high efficiency of 97% or more under 50% or more load conditions.
- Monitoring capabilities of the system
- The PV inverter displays and guides you through the LCD display to power control and health monitoring by the DSP. In case of fault detection, self-protection interrupts power generation and displays abnormal conditions on the LCD display.
In addition, status monitoring through PC is also possible.
INVERTER FOR PHOTOELECTRIC POWER GENERATION SYSTEM
- Optimal design of installation and operation DIK PV Inverter has enhanced the thickness and painting of the case to avoid durability and appearance problems. It also displays information such as the operating status and power generation of the inverter on the LCD display, and automatically starts and It is designed to automatically stop and to self-diagnose even when a failure is detected and to attempt an automatic restart of the large climate for 5 minutes.
- Maximum Output Point Control Since the power characteristics of solar cells vary according to the amount of insolation and temperature, it is necessary to change the operating point of the inverter according to the output state of solar cells to obtain maximum power. The DIK PV inverter determines the output of these solar cells and controls the operating point so that the inverter always has maximum efficiency.
- High power factor and high efficiency inverter
- The DIK PV inverter always controls the power factor to be greater than 0.98 (30% load condition) depending on the system, reducing harmonic damage to other electrical appliances connected to the system and always providing clean power. In addition, conversion efficiency is also operated at a high efficiency of 97% or more under 50% or more load conditions.
- Monitoring capabilities of the system
- The PV inverter displays and guides you through the LCD display to power control and health monitoring by the DSP. In case of fault detection, self-protection interrupts power generation and displays abnormal conditions on the LCD display. In addition, status monitoring through PC is also possible.
System circuit diagram
Specifications
Input (DC)
-
Maximum input voltage
1000V
-
Rated voltage
600V
-
Power generation start voltage
500V
-
Input voltage range
350 - 1000V
-
Operating MPPT voltage range
450 - 800V
-
Rated MPPT voltage range
480 - 800V
-
Maximum input Current
160 A
-
Rated Current
219 A
-
circuit breaker
200 A
-
Control method
MPPT Control, SVPWM, high efficiency 3 Level
-
MPPT Control Circuit
1
-
Maxium power point tracking Efficiency
>99%
Output(AC)
-
Rated output
75.0kW
-
Rated voltage
380V
-
Grid Voltage Range
380V (+10%, -12%)
-
Rated Current
114 A
-
short circuit current
159.5 A
-
Breaker Capacity
Not applicable
-
System Frequency Range
50/60 Hz
-
System Frequency Range
60 Hz(+1.5Hz, -2.5 Hz)
-
Constant
3-phase 4-wire (Wireless transformer type)
-
Power Factor
More than 0.99
-
Current distortion(THD)
Total within 5% / each difference within 3%
-
Power factor control function
General operation, DER-AVM,Q(V)
-
Output control function
possibility (DER-AVM interlock)
efficiency
-
Max. efficiency
>98%
-
Euro Efficiency
>97.5%
Protection function
-
Inverter Protection
Input over-voltage / Output short circuit / Overload / Overheating / Prevention of DC output leakage
-
Grid Protection
Anti Islanding / System Low-voltage / System Over-voltage / System Low-frequency / System Over-frequency
-
Anti Islanding Operation
Within 0.5 sec.
구조
-
Cooling Method
Forced Air Cooling(AC FAN)
-
Display
Graphic LCD
-
Communication
RS485 4PORT / Ethernet 1PORT
-
IP No.
IP 65(outdoor type)
-
Dimension(WxHxD)mm
650 x 1000 x 320 mm
-
Weight
115.5 kg
Protection function
-
Inverter Protection
Input over-voltage / Output short circuit / Overload / Overheating / Prevention of DC output leakage
-
Grid Protection
Anti Islanding / System Low-voltage / System Over-voltage / System Low-frequency / System Over-frequency
-
Anti Islanding Operation
Within 0.5 sec.
Ambient Condition
-
Ambient Temp / Operating Temp
-10°C ~ 40°C / -20°C ~ 65°C
-
Ambient Humidity
Relative humidity lower than 90% RH (Place without dew formation)
-
Environmental Condition
Place free from corrosive gas, inflammable gas, oil misty, dust, etc
Input (DC)
-
Maximum input voltage
1000V
-
Rated voltage
600V
-
Power generation start voltage
500V
-
Input voltage range
350 - 1000V
-
Operating MPPT voltage range
450 - 800V
-
Rated MPPT voltage range
480 - 800V
-
Maximum input Current
160 A
-
Rated Current
219 A
-
circuit breaker
200 A
-
Control method
MPPT Control, SVPWM, high efficiency 3 Level
-
MPPT Control Circuit
1
-
Maxium power point tracking Efficiency
>99%
Output(AC)
-
Rated output
75.0kW
-
Rated voltage
380V
-
Grid Voltage Range
380V (+10%, -12%)
-
Rated Current
114 A
-
short circuit current
159.5 A
-
Breaker Capacity
Not applicable
-
System Frequency Range
50/60 Hz
-
System Frequency Range
60 Hz(+1.5Hz, -2.5 Hz)
-
Constant
3-phase 4-wire (Wireless transformer type)
-
Power Factor
More than 0.99
-
Current distortion(THD)
Total within 5% / each difference within 3%
-
Power factor control function
General operation, DER-AVM,Q(V)
-
Output control function
possibility (DER-AVM interlock)
efficiency
-
Max. efficiency
>98%
-
Euro Efficiency
>97.5%
Protection function
-
Inverter Protection
Input over-voltage / Output short circuit / Overload / Overheating / Prevention of DC output leakage
-
Grid Protection
Anti Islanding / System Low-voltage / System Over-voltage / System Low-frequency / System Over-frequency
-
Anti Islanding Operation
Within 0.5 sec.
구조
-
Cooling Method
Forced Air Cooling(AC FAN)
-
Display
Graphic LCD
-
Communication
RS485 4PORT / Ethernet 1PORT
-
IP No.
IP 65(outdoor type)
-
Dimension(WxHxD)mm
650 x 1000 x 320 mm
-
Weight
115.5 kg
Protection function
-
Inverter Protection
Input over-voltage / Output short circuit / Overload / Overheating / Prevention of DC output leakage
-
Grid Protection
Anti Islanding / System Low-voltage / System Over-voltage / System Low-frequency / System Over-frequency
-
Anti Islanding Operation
Within 0.5 sec.
Ambient Condition
-
Ambient Temp / Operating Temp
-10°C ~ 40°C / -20°C ~ 65°C
-
Ambient Humidity
Relative humidity lower than 90% RH (Place without dew formation)
-
Environmental Condition
Place free from corrosive gas, inflammable gas, oil misty, dust, etc
다운로드
제품 메뉴얼, 성적서, 제품스팩, 외형도, 카탈로그, 회로도를 다운 받으실 수 있습니다.
제품 메뉴얼, 성적서, 제품스팩, 외형도, 카탈로그, 회로도를 다운 받으실 수 있습니다.
Download
You can download the product manuals, reports, product specifications, outside view, catalog and circuit diagram.
You can download the product manuals, reports, product specifications, outside view, catalog and circuit diagram.